Christmas is coming, and what will you choose to give them. Here I have a good choice for you to those electronic engineers. It is known to all that resistors, capacitor and inductor are the common electronic components in electronic field. While tuning the circuit, engineers always need to change the resistor and capacitor values. It is true that they need to solder different resistors frequently, so if engineers can have a convenient resistor kits, it will be wonderful. Therefore, Analog Technologies, Incorporated developed a resistor kit, which offers engineers great conveniences. Please find the following physical photo of it.
Now, let me introduce this resistor kits specifically. The Super SMT Component Enclosure™ measures: 11" (L) * 8.5" (W) * 1.75"(H) or 280mm (L) * 216mm (W) * 45mm (H), its size is suitable for placing in our bags. What’s more, all the surface mount resistors are pre-sorted and securely stored in our Super SMT Component Enclosure™ with surface mount resistor values printed clearly on each lid. You will find every value at a glance. No more searching and sifting through a sea of resistor values for the one you need. Analog Technologies’ Super SMT Resistor Kits™ each have 128 values per kit and 510 values per set (a set of resistor kits uses 4 enclosures and 128 values per kit), which include all the values specified by the E24, E48 and E96 EIA Standards respectively. Our 510-value kits cover all the 510 values plus extended low-end values, from 0 Ohm to 10 Ohm, and high end values, from 1M to 20M.
For more information, you can refer to our webpage at here.
