ATE1-127 TEC Modules

Time : Feb 17 2015Source :analogtechnologies Author : Analog Click :

ATE1-127 TEC Modules have 127 pairs of Peltier elements. The maximum voltage is 15.4V, and there are 17 kinds of maximum current to choose from. The TEC module is used to accurately adjust the object temperature, when working with TEC controller, a highly stable and efficient temperature control system is constituted. ATE1-127 TEC is composed of two pieces of bare ceramic plate with very smooth surface. The ceramic plates can be installed to the flat surface of the metal, and there are a few layers of thermal conductivity of filler material (thermal conduction silicon or conductive grease) between them. When installing, please ensure uniform force so that thermal contact between TEC ceramic and metal will be good, and thermal resistance will be reduced to the minimum.

TEC can withstand the vertical force but can’t withstand the tangential force, especially the vibration. Even a tiny vibration tangential force will cause internal cracks ofPeltier elements.Althoughthe early damage can’t cause the operational problems, with time going by, the further problems will come out, namely, the resistance of the TEC will increase slowly until it stops working.
The TEC can rapidly adjust object temperature and make temperature stable in a wide range with high accuracy.This module is widely applied in many fields, such as solid state laser, optical components, CCD, IR camera, biological technology test, etc.ATE1-127 TEC Modules have 62 types, and you can choose what you need.