Ultra Low Noise Diode Laser Drivers/Controllers ATLS100MA103

Part Number 1-9 PCs 10-49 PCs 50-199 PCs 200-499 PCs ≥500 PCs stock Buy Now Datasheet
ATLS100MA103 $68 $65.3 $61.5 $57.8 $54 27 buy now Buy Now Datasheet

Low Noise Constant Current Laser Driver


Ultra Low Noise: 1.5μAp-p @0.1Hz to 10Hz

Output Current without Heat Sink: 100mA

High Absolute Accuracy: <0.1%

High Stability: <100ppm/°C

Programmable Current Limit through Separate Port

Complete Shielding

Compact Size

100 % Lead (Pb)-free and RoHS Compliant

DIP and SMT Packages Available



ATLS100mA103D can be used to drive laser diodes with low noise, including DPSSL, EDFA, SOA, fiber laser, direct diode lasers, etc.


The ATLS100MA103 is an electronic module designed for driving diode lasers with up to 100mA low noise current. When the maximum power consumed by the controller is maintained to <1W, it does not require a heat sink to operate. The controller has temperature compensation network so that the output current maintains the same even as the controller temperature rises.

The output current of the ATLS100MA103 can be set by an input voltage linearly or modulated by an external large signal of up to 1.2MHz in bandwidth, resulting in a minimum 1μS rise and fall times at the output current.