This TEC controller TEC28V15A comes with high voltage and high current, which is newly developed and manufactured by ATI. This high voltage TEC controller is used for driving high current TEC modules with high stability. Although this controller has high voltage and current, but it has a very small size that helps users save much space. The output voltage of this TEC controller is 28V and the output current can reach 15A. Moreover, it comes with a high efficiency, over 92%. There are many other...(more)
The ATH10KHN6 is a high stability and miniature ntc thermistor assembly with a threaded hex nut. This thermistor assembly can be used for detecting temperature and sensing, and air sensors, etc. This new ntc thermistor assembly has a wide temperature range, from 40C to 270C. The nominal resistance at 25C is 10k. This thermistor assembly comes with a small dimensions, which is shown in the picture below. The length of the threaded hex nut is 6mm+6mm, and the inner diameter of the threaded hex nut...(more)
The ATH10KHN4 is an ntc thermistor assembly with a threaded hex nut. This NTC thermistor has two copper coated leads. It is used for applications such as temperature sensing and detection, transformers, and air sensors, etc.. ATH10KHN4 thermistor assembly has many features such as long term stability, high reliability, compact size and short response time. Moreover, it can be used in a wide temperature range, from 40C to 270C. This ntc thermistor assembly has a high resistance accuracy, 1%. By u...(more)
ATCDB12 is an adjustable capacitor decade box that is designed and used for easy tuning of analog circuits. This box comes with a compact size that is suitable for laboratory experiments. Electronic engineers can tune it to a desired capacitance value. This adjustable capacitor decade box has a wide adjustable range, from 1pF to 100F, and the adjustment resolution is 1pF. This decade box also has a high accuracy, 5%. The adjustment ranges are: 1pF to 9pF; 10pF to 90pF; 100pF to 900pF; 1nF to 9nF...(more)
ATRDB12 is an adjustable resistor decade box, which is used for tuning analog circuits or doing experiments. It comes with accurate knobs for dialing to different resistances. Its comfortable to use it and users can read the total value easily. This box has a compact size that saves much space for most of applications. This adjustable resistor decade box has a wide adjustable range, and there are eight decades, from 0.36 to 9M, i.e., 0.1Ω ~ 0.9Ω; 1Ω ~ 9Ω; 10Ω ~ 90Ω; 100Ω ~ 900Ω;...(more)
TEC5V6A-DAH is an upgraded version of ATI existed TEC controller TEC5V6A-D. This TEC controller has a higher precision than existed TEC controller in driving thermoelectric cooler. The TEC5V6A-DAH TEC controller is used for regulating the object temperature with high stability, high energy efficiency, and zero EMI. It provides some interface ports for setting the desired object temperature, such as the set-point temperature, the maximum output voltage across TEC, and the compensation network. Co...(more)
TEC5V4A-DAH TEC controller is newly developed by ATI, based on the existing TEC controller TEC5V4A-D. This TEC controller is designed and used for driving TEC (thermoelectric cooler) with high stability, high efficiency, and high precision. As indicated in the part number, TEC5V4A-DAH, the maximum output current is 4A and the maximum output voltage is the input voltage minus 0.2V. As mentioned above, the stability of this TEC controller can reach 0.01C, and the efficiency is as high as over 90%....(more)
103 series laser drivers come with ultra low noise, and the current value can be 100mA, 200mA, 250mA, 500mA or 1A. This laser driver, ATLS200MA103, is one of 103 series laser drivers. It is used for driving diode lasers with up to 200mA low noise current. As shown in the photo below, this laser driver has a very small size so that it can save a lot of space for most of applications. The input voltage is 5V and the output voltage is 1.5V to 4V. The noise is as low as 2.5AP-P @ 0.1Hz to 10Hz. Ther...(more)
