Here at ATI, weve been designing and redesigning our special kits for almost twenty years and are proud to offer the absolute best resistor kits on the market; the Super SMT Resistor Kits. These kits combine convenience, style, and impeccable organization into one portable case thats hard to resist! Our SMT resistor kits are made with our very own special containers, the Super SMT Component Enclosure. It features 128 compartments, each with its own individual locking lid. No more getting your re...(more)
ATH10K1R0 series ntc thermistors are glass encapsulated, with two coated lead wires. Glass encapsulated ensures the thermistor a long term stability, and the coated lead wires can prevent them from touching and then shorting each other. Compared with epoxy ntc thermistors, glass encapsulated ones have smaller size, shorter response time, and better long term stability. They have wider temperature range. Since ATH10K1R0 thermistors have the thermistor head and the lead wires sealed, they can be a...(more)
Analog Technologies, Inc organized a trip to Changshan Island for all the staff in ATI's China office. There are more than 60 people in the brand office and they had a really wonderful time in the island. ...(more)
As it is known to all, some very low frequency noise (0.1Hz to 10Hz) can’t be measured by oscilloscope, so we design a circuit to amplify these low noises to make sure noise value can be common figures which has been given in amplifier datasheets. A...(more)
NTC is short for Negative Temperate Coefficient. Resistance is varied with the temperature change, and its resistance will decrease when the temperature rise and vice-versa. For example, the resistance is 50kΩ when it is at 25℃, while the resistanc...(more)
This dual mode laser diode driver LDA1-CP1 is designed for driving P type laser diode. This laser driver can control and monitor the output driving current and output laser power. The laser driver comes with PWM output stage with an efficiency of over 90%, so it doesnt need any heat sinks. For this laser driver, the output current and laser power can be set by two independent input voltages linearly, and can also be monitored by its output voltages respectively. This laser driver has a 2.5V low...(more)
ATE1-TC-199 long life TEC modules have 199 pairs of Peltier elements, and no moving parts. Long life refers that these TEC modules have a long service life when suffering frequent changes between heating and cooling. Standard TEC modules will have a shorter life time when suffering the same. Many experiments show that ATE1-TC-199 TEC modules have significantly long life time in thermal cycling applications. The maximum input voltage is 27.4V, and the current is 13A. There are two types in this s...(more)
ATE1-TC-127 series TEC modules come with 127 pairs of Peltier elements, with the maximum input voltage of 17.5V or 16.2V. These TEC modules can be used in thermal cycling applications with a long service life. There are currently six models in this series, and the current can be 5.5A, 5.7A,7.8A, 8A and 12.1A. Therefore, the power ratings are different. The maximum temperature that this series TEC modules can attain can be 74.5C, 72.5C and 72C. There are two sealing version available, sealed and...(more)
