FLUKE Digital Multimeter

FLUKE Digital Multimeter F15B+

Faster response
Greater capacitance range: 0.01nF ~ 1000μF
Increased Brightness: Added white LED backlight
Larger screen: 1.5 times larger than original screen

FLUKE Digital Multimeter F17B+

Maximum Voltage between any Terminal and Earth Ground: 1000 V
Fuse Protection for mA μA inputs: 500 mA, 1000 V FAST, Min. Interrupt Rating 20,000 A
Fuse Protection for A input: 10 A, 1000 V FAST, Min. Interrupt Rating 20,000 A
Display: Digital: 4000 count updates 3/sec

FLUKE Digital Multimeter F18B+

Faster response
Greater capacitance range: 0.01nF ~ 1000μF
Increased Brightness: Added white LED backlight
Larger screen: 1.5 times larger than original screen

FLUKE Digital Multimeter F101 Kit

Terminal maximum input voltage: 600V
LCD According to: 6000 word refresh rate of 3/seconds
Power supply: 2 AAA, NEDA 24A, IEC LR03
Battery life: More than 200 hours
Operating temperature: 0 °C to 40 °C

FLUKE Digital Multimeter F106

Maximum Voltage Between any Terminal and Earth Ground: 600V
Display (LCD): 6000 counts, updates 3/sec
Battery Type: 2 AAA, NEDA 24A, IEC LR03
Battery Life: 200 hours minimum

FLUKE Digital Multimeter F107

Voltage, resistance, continuity, capacitance
Input terminal for AC and DC current measurements to 10 A and current
Backlit display
Data hold
Diode test, plus frequency and duty cycle measurements

FLUKE Digital Multimeter F2AC

EMC Compliance: Meets IEC 61326-1:2006
Operating: 90 V ac to 1000 V ac, CAT IV 1000 V rated
Altitude: 2000 m (CAT IV 1000 V)
Cleaning: Clean with damp cloth
Battery Life: typical battery life of greater than one year

FLUKE Digital Multimeter F302+

New smaller size fits easily into tight places
Precise measurements with 1.8% basic accuracy
Resolution up to 0.01A and 0.1 V
Measures AC current to 400 A
Measures AC volts to 600 V
Resistance measurement to 400 Ω

FLUKE Digital Multimeter F362

Compact design, allows single handed operation
Large-screen display of 2000 characters
200A AC and DC current, 600V AC & DC voltage measurement
3000 ohm resistance range, continuity test
Zero function, can be cleared for DC measurement
Non-detachable jaw clamp
Security level: CAT III 600V

FLUKE Digital Multimeter F365

200 A AC and DC current measurement with detachable jaw
600 V AC and DC voltage measurement
Detachable jaw makes accessing wires and viewing the display easier
Built in flashlight/torch allows for easy illumination and identification of wires
CAT III 600 V
Compact design fits in your hand and can be used while wearing protective equipment

FLUKE Digital Multimeter F317

FLUKE 317 Clamp Meter with battery
One pair of test leads
English manual
Registration Information Card
Original FLUKE Portable bag

FLUKE Digital Multimeter F319

One pair of Banana Test leads
FLUKE 319 Meter
Original FLUKE case
User Manual
Product registration card

FLUKE Digital Multimeter T5-1000

The Fluke T5 Electrical Tester lets you check voltage, continuity and current with one compact tool. With the T5, all you do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Available in 600V and 1000V models.

FLUKE Digital Multimeter T6-1000

Increased safety: Measure voltage to 1000 V AC through the open fork, without test leads.
Fast use and accessibility: No need to open covers or remove wire nuts.
Be more efficient: Simultaneously measure voltage and current.
Be everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2).
Go beyond simple detection. Accurately measure AC voltage and current values without test leads.

FLUKE Digital Multimeter T6-600

Be safer: Measure voltage to 600 V AC through the open fork, without test leads.
Be faster: No need to open covers or remove wire nuts.
Be more efficient: Simultaneously measure voltage and current.
Be everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2).
Go beyond simple detection. Accurately measure AC voltage and current values without test leads.

FLUKE Digital Multimeter F414D

The most advanced laser technology for distance measurement
Simple one-button operation to instantly measure distance between two objects
Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in)
Bright laser for easy targeting even at longer distances
Quick calculation of area (square feet/meters) and volume
Easy addition and subtraction function

FLUKE Digital Multimeter F62_MAX

Optical Resolution:
Fluke 62 MAX     10:1 (calculated at 90% energy)
Fluke 62 MAX +  12:1 (calculated at 90% energy)
Display Resolution: 0.1 °C (0.2 °F)
Power: AA battery
Battery Life:
Fluke 62 MAX  10 hours with laser and backlight on
Fluke 62 MAX+  8 hours with laser and backlight on

FLUKE Digital Multimeter F12E+

Maximum voltage between any terminal and ground: 1000 V
LCD: 4000 counts, updated 3 times per second
Battery Type: 2 AA, NEDA 15A, IEC LR6
Battery life: Minimum 500 hours (LED test mode and 50 hours without load. In case of load, battery life depends on the type of LED being tested.)

FLUKE Digital Multimeter MT4_MAX

Power: 1AA IEC LR06 Battery
Battery life: 12 hours with laser and backlight on
Weight: 220g
Size: 156 x 80 x 50(mm)
Drop test: 1m

FLUKE Digital Multimeter F59

Response time: < 500ms
Display resolution: 0.2°C (0.5°F)
Spectral range: 6.5 – 18 um Thermopile detector
Display hold 7 seconds: Yes
LCD backlight: Yes