| Part Number | Unit Price |  |
Buy Now |
|---|---|---|---|
| AHVAPNBN2SHV | $19 | 0 |   |
SHV male to red / black 4mm banana plugs
The AHVAPN…BN high voltage amplifiers have a banana-jack output. Many piezo stages, test fixtures and HV cables use SHV connectors. The AHVAPNBN2SHV connects the two: the red and black banana plugs go into the amplifier output, and the SHV male connector goes to your SHV cable or load.
The cable is rated 5000V. This is well above the ±2000V maximum output of the AHVAPN2000V20MABN. The short 0.3m length keeps the added cable capacitance low.
| Part Number | AHVAPNBN2SHV |
|---|---|
| Connector A | SHV male |
| Connector B | 4mm banana plug × 2 (red / black) |
| Cable Length | 0.3m (11.8in) |
| Rated Voltage | 5000V |
| Weight | 0.3lb |
| Part Number | Output Voltage | Output Current | Amplifier Output |
|---|---|---|---|
| AHVAPN1KV20MABN | −1kV to +1kV | Up to 20mA | Banana |
| AHVAPN1800V20MABN | −1800V to +1800V | Up to 20mA | Banana |
| AHVAPN2000V20MABN | −2000V to +2000V | Up to 20mA | Banana |
Only for these three models. All other ATI high voltage amplifiers already have an SHV output and do not need this cable.
Only the banana-output models: AHVAPN1KV20MABN, AHVAPN1800V20MABN and AHVAPN2000V20MABN. Other ATI high voltage amplifiers have an SHV output.
SHV connectors are made for high voltage. They cannot mate with standard BNC connectors, so a high voltage line cannot be plugged into low voltage equipment by mistake.
Yes. The highest output in the AHVAPN series is ±2000V (AHVAPN2000V20MABN). The cable is rated 5000V.
0.3m (11.8in). If you need a longer run, connect a standard SHV cable to the SHV end.
The amplifiers run from 24V DC. If you do not have a 24V supply, see the AHVAPS24V 24V power supply.
