 |
|
High
Efficiency TEC Controllers
are designed for driving TECs with high stability, high response speed, high efficiency and low cost.
Our TEC controllers have
small sizes, do not require heat sinks to operate, and have been widely used
for temperature controls in
such as EDFAs, laser modules, passive fiber components,
diode pumped lasers, instrumentation sensors, etc.
Click
here for data sheets and price list
|
 |
|
This
TEC
Controller Evaluation Kit can be used for evaluating our TEC
controllers conveniently. It is worth noting that the evaluation
board comes with a tunable compensation network which can be tuned
easily for matching the characteristics of the users' thermal loads,
minimizing the time takes for the target temperature to reach the
desired value and stabilizing the target temperature within a tight
tolerance from the set-point temperature.
Click
here for price list
Datasheet
for evaluation board TECEV-103
|
 |
|
High Performance Low
Cost TEC Modules
TEC modules are the essential components for
keeping the laser chips working at a constant temperature, thus, the
lasers will have constant output wavelength, power and less or no
mode hopping.
We offer a
wide variety of high quality
TEC Modules. Many of them work well
with our TEC controllers and thermistors.
|
 |
|
Our thermistors
can be used with our TEC controllers for
high stability low drift temperature control applications. These thermistors
have high precision (+/-0.25C@25C), compact size (bare version), and
are coated with glass resulting in low drift. They come in bare and lugged forms.
|
|
|
|
| |
|
|
 |
|
High Efficiency Laser Controllers are designed for driving diode lasers. They
have high precision, high stability, low noise, small size, do not require heat sinks
to operate, and have been widely used in EDFAs, laser transmitters, diode pumped solid state lasers, etc.
|
 |
|
This
Dual Mode Laser Driver
is for
driving diode lasers with high power or current stability with high efficiency.
It
provides these the functions: laser constant current control, laser constant
power control, laser current monitoring, laser power monitoring, control loop
good indication, and shut down.
Click here for datasheets and
price list |
|
 |
|
The ATLS1A103D is an electronic module designed for driving diode
lasers
with up to 1A ultra low noise current. The output voltage range is
from 1.5V
to 4V when powered by a 5V power supply. This laser driver module
can be
evaluated conveniently by using the ATLS1A103DEV1.0, the Evaluation
Board for ATLS1A103D Revision 1.0. The main purpose of using the
evaluation board is to let the controller drive a voltage
configurable unbreakable dummy laser diode on the board to emulate
users' actual expensive laser diode with a programmable current.
|
|
|
This Ultra Low Noise Laser Driver
(ATLS1A102) is designed for building ultra low noise diode lasers. It has 2 modulation ports: one for low noise
low speed and the other for high speed. The loop good indication monitors the working status of the laser driver. Its package is small and has 2 types of mounting
packages: DIP and SMT. Using this laser driver along with our TEC controller allows
for building high performance low cost diode laser modules.
|
| |
|
|
 |
|
The Ultra bright, energy efficient LED bulb
Our GOLDLED and SILVERLED are the drop-in
replacement LED bulbs for replacing the traditional incandescent
bulbs found in the industrial flashlights, particularly, for the
railway lanterns used in the railway fields.
This utltra brigh, energy efficient LED bulb runs off from either a 3 cell battery array or a
lantern battery, and can be installed instantly into industrial
flash lights to extend the battery run time by > 8 times.
Since the controller works
in
high efficiency, 95%, at a wide input voltage range, 2.6 to 6V, the energy in the
battery is much more fully utilized than other similar products,
resulting in a longer working
time for the same battery.
This bulb uses a highly stable current
stabilization control circuit for keeping the output current
constant, so that it can tolerate strong interferences from other
electronic devices.
Datasheet for
GOLDLED
Datasheet for SilverLED |
 |
|
Surface mount components are getting more popular nowadays. Do you have a mess when organizing them?
Most people do.
Analog Technologies own patented
Super Enclosure for safe-keeping and easy access of
resistor kits,
capacitor kits and
inductor kits.
Please also visit our web sites for more products
related:
Datasheet for Super Surface Mount Resistor Kits
Datasheet for Super Surface Mount Capacitor Kits
Check Prices
|
 |
|
The World's only SMD Enclosure with >100
Compartments
Our SMD enclosure is the world's only one which has > 100
compartments for
enclosing SMT components, such as chip resistors, capacitors,
inductors,
ICs, etc. This enclosure come with 128 individually lidded
compartments.
This electronic parts box comes with a set of labels, which can be
hand
written or laser printer printed with proper marking for each lid.
Using
this enclosure will make your lab bench neat and your parts well
organized. |
 |
|
Our LED Controllers
are of high efficiency,
high stability, small size, robust and low cost. They have wide
ranges in input voltages, output voltage, and output currents. The
output currents can either be continuously adjustable or have
fixed values.
Datasheet for
ABK36V1A
Datasheet for the obsolete controller LED22V1A
|
