ATH10KL2A is a kind of NTC thermistor , which is packaged with glass.The resistance value of NTC thermistor ATH10KL2Ais 10K at the temperature of 25C. This NTC thermistor comes with an extra small ring lug for being fixed easily. As NTC thermistor ATH10KL2A has compact size, short respond time and some other good characteristics, it has been widely utilized to measure the temperature of laser diode, optical elements, etc.,with high accuracy and long term stability. Figure 1 is the physical photo...(more)
Continued from the last article. We have SMT kits with components already sorted inside, i.e. resistor kits, capacitor kits and inductor kits. These kits have different quantities and component values presorted in the kits. Resistor kits have 1206 1/4W 1% resistors, 0805 1/8W 1% resistors, 0603 1/10W 1% resistors, 0402 1/16W 1% resistors, 0603 5% resistors, and 0805 5% resistors inside. Moreover, there are 128 values/kit (use one enclosure), and 510 values/set (a set of resistor kits include 4 e...(more)
Continued from the last article. Since the kits are small, its easy to carry it when you go out. You can just put it into your bag, as easy as carrying a book.The kits enclosure has a letter paper size: 11(L) 8.5(W) 2.2(H) (279mm(L) 216mm(W) 56mm(H)). In addition, the compartments form a matrix of 8 rows 16 columns. ATI offers a coverlet label with the component kits, or you can print it out by yourself.The coverlet label can be printed by the laser printer, or written by hand. We also provide t...(more)
TEC5V4A-D is a kind of Peltier controller , which is used to monitor and regulate the object temperature. The maximum output current of Peltier controller TEC5V4A- D is 4A and the maximum output voltage is 4.7V. This Peltier controller has high efficiency and high reliability. Peltier controller provides two packaging methods, DIP package and SMT package. The following is the physical photo of Peltier controller TEC5V4A-D. Figure 1. The photo of Peltier controller TEC5V4A-D There are many interf...(more)
Peltier controller is an independent research and development product of ATI , which is designed for drivingthermoelectric coolers ( TECs ) to regulate the object temperature. Peltier controller has many good characteristics, such as high energy efficiency, high stability, high accuracy, compact size, etc. As shown in Figure 1, this Peltier controller packaged in a six sided metal enclosure has zero EMI to avoid the interference with other electronics. Peltier controller can realize such functio...(more)
For various electronic SMT components such as inductors, resistors and capacitors, a proper kit for collecting them is very practical and important. ATI researched and developed a SMT component kit about 20 years ago, which are still protected by USPTO for its patent. The designer is a professional electronic engineer, who found it difficult and inconvenient to arrange and collect different SMT components on the workbench before the kit was invented. These components are essential for basic elec...(more)
ATH10KL2B is a NTC thermistor with an extra small ring lug that is used for easy fixing. There is a glass encapsulated NTC thermistor ATH10K1R25 with high stability and accuracy inside the ring lug. Glass encapsulated thermistor presents better long term stability and reliability, and has a wider temperature range. ATI provides another two types of this NTC thermistor for different applications, ATH10KL2BT70 and ATH10KL2BT70S. The former has two leads covered with plastic tubing but non-sealed,...(more)
ATH10K1R0 is a NTC thermistor with thermistor head encapsulated with glass instead of epoxy. Glass encapsulated NTC thermistor presents better long term stability, more compact size, shorter response time, and a wider temperature range. This NTC thermistor has two leads covered with high temperature plastic tubing and gets sealed between thermistor head and two leads, which can prevent the thermistor from being corroded in the liquid. The covered leads can prevent them from shorting from each ot...(more)
