TEC5V4A-D is a high efficiency Peltier controller , which is designed and produced by ATI . TEC5V4A-DPeltier controller comes with many interface ports that can be used to set the required object temperature and the maximum output voltage. This Peltier controller has high efficiency, high accuracy, high reliability, etc. Because of the above advantages, TEC5V4A-DPeltier controller has been widely utilized to drive TEC ( thermoelectric cooler ). The following is the photo of TEC5V4A-DPeltier cont...(more)
The ATH100K1R25 is a high precision and glass encapsulated NTC thermistor with high stability. This NTC thermistor can be applied for temperature sensing for laser diodes, optical components, temperature control system, industrial process control, etc. All these applications require high temperature sensitivity, long term stability, and/or high sensing temperature. This NTC thermistor is the same as ATH10K1R25 on its size and dimension. The thermistor head is 1.25mm2.0mm. The length of its two l...(more)
TECA1-XV-XV-D is a kind of Peltier controllers , which is an electronic module with an output current up to 2.5A. This Peltier controller has high efficiency (more than 90%), high stability, high reliability and compact size, so it can meet variousdemands of driving thermoelectric cooler ( TEC ). TECA1-XV-XV-DPeltier controller is 100% lead (pb)-free and RoSHcompliant. Figure 1 is the physical photo of TECA1-XV-XV-DPeltier controller.TECA1-XV-XV-D is packaged in six sided metal enclosure, which...(more)
ATH10K0.1%1R25 is a glass encapsulated NTC thermistor, with compact size and high stability and reliability. This NTC thermistor has a higher accuracy than a similar thermistor ATH10K1R25 . The accuracy is about 0.1%, and the accuracy of ATH10K1R25 is 1%. Comparing with epoxy encapsulated thermistors, this high accuracy glass encapsulated NTC thermistor has wider temperature range, especially on the high end, better long term stability, smaller size, and shorter response time. The length of ther...(more)
ATH100KR8B is a negative coefficient thermistor, which has been commonly used for many years. This NTC thermistor is similar to ATH10KR8B , but has a different nominal resistance at 25 Celcius degree, 100K 1%. This NTC thermistor is glass encapsulated with high stability and reliability. The compact size is suitable for high precision temperature system, 0.8mm × 1.4mm. The length of the leads is 63±3mm. There are three versions of this thermistor regarding its lead types. One is bare leads, and...(more)
ATFC105D is a kind of Peltier controller , which is designed for driving and monitoring TEC/Fan assemblies. The high output power for TEC of ATFC105D Peltier controller is 12V20A and it has high efficiency, more than 98%. Because of compact size and no heat sink required, it is very convenient to use this Peltier controller. The following is the physical photo of ATFC105D Peltier controller. Figure 1. The photo of an actual ATFC105D Peltier controller By using a TEC array and a fan array, ATFC10...(more)
NTC thermistor ATH10KR8B is a replacement thermistor for ATH10KR8, which has stopped production. ATH10KR8B has wide applications, such as temperature sensing, measuring and controlling for laser diodes, optical components and other temperature control systems. Like ATH10KR8, ATH10KR8B also has three versions, one sealed and two non-sealed. The sealed version is ATH10KR8BT65S, which means the thermistor leads are covered with plastic tubing and get sealed between the thermistor head and tubing. T...(more)
Inductor kits were developed by Analog Technologies (ATI) in 1997. Inductor kits are our US-patented products, as shown in Figure 1. Inductor kits are very popular among electronic designers because of having compact size, carrying easily and searching elementconveniently. Figure 1. The physical photo of an inductor kit There are 128 individually lidded compartments (0.87 (L) * 0.59 (W) * 0.63 (D)) with inductor valuesprinted on the lid of each enclosure. As the lid of each small enclosure insid...(more)
