NTC thermistors are widely used in temperature measurement and control system. ATI provides a complete series of NTC thermistors with high stability, high accuracy and a long service life, such as There is a main theory of liquid level measurement for NTC thermistor. The gas and liquid are different media. If we can distinguish these two media, its easy to solve the problem of liquid level measurement when measuring them with NTC thermistors. Its difficult to judge the media according to the mea...(more)
A Peliter controller is an electronic module, which is designed to control and monitor the temperature of thermal electric coolers (TEC). It has many excellent performances, such as high efficiency, high reliability and high stability. The Peltier controller packaged in a six sided metal enclosure (see Figure 1) can block the interferences between the controller and other electronics. Figure 1. The Peltier controller Users can only select the manual soldering method to solder the Peltier control...(more)
The ATFC105D Peltier controller is designed for controlling and monitoring the temperature of TEC/Fan assemblies. As thisPeltier controller has high efficiency, high stability and high reliability, it has become more and more popular among electronic designers. In addition, as shown in Figure 1, the ATFC105DPeltier controller has a compact size and needs no heat sink during operation, so it is very convenient to use, carry and store. Figure 1. The ATFC105D Peltier controller It is very easy for...(more)
The ATFC105D is a Peltier controller with high efficiency (more than 98%), high stability and high reliability. The Peltier controller is designed to driveand monitor thermal electric coolers (TECs) /fan assembles. It provides a high output power for TECs. As the ATFC105DPeltier controller has a compact size (see figure 1) and there is no need of heat sinksduring operation, it is very convenient to use, carry and store. Figure 1. The ATFC105DPeltier Controller The ATFC105DPeltier controller come...(more)
Analog Technologies, Inc. offers a series of NTC thermistors with or without a ring lug, such as ATH10K1R25 and ATH10KL2B , etc. There is a very important factor in NTC thermistors, dissipation factor. We are looking for the relationship of self-thermal and dissipation factor. Its usually in still air to test the dissipation factor of NTC thermistors. Its often in a glass container. When we do the test, the temperature of the inner glass container should be the same as the room temperature while...(more)
The TEC5V6A-D Peltier controller is a high efficiency, high reliability and high stability electronic module, which is designed to drive the thermal electric cooler modules (TEC). The TEC5V6A-D has a compact size (see figure 1), and it is packaged in a six sided metal enclosure, helping to block the electromagnetic interference. Figure 1. TEC5V6A-DPeltier controller This Peltier controller provides many interface ports for users to set the desired temperature, the maximum output voltage across t...(more)
ATW3A314 is a compact high efficiency electronic module, which is utilized to control thermal electronic coolers (TECs). ATW3A314 Peltier controller has a compact size and high efficiency (more than 90%), and it provides Seebeck voltage available. It comes with an automatic standby mode. Figure 1 is the physical picture of an ATW3A314 Peltier controller. Figure 1. The photo of an ATW3A314 Peltier controller By using the Peltier controller, the required object temperature can be set, monitored an...(more)
ATW3A314 is a high efficiency window Peltier controller, which is designed to control thermal electric coolers ( TECs ). Using ATW3A314 Peltier controller, a target object temperature can be regulated within a pre-set temperature window. This Peltier controller has high working efficiency (more than 90 %), a compact size, and zero EMI. Figure 1 is the photo of an ATW3A314 Peltier controller. Figure 1. The photo of an ATW3A314 Peltier controller By using this Petier controller, users can set the...(more)
