ATH10K1R0 is a NTC thermistor with thermistor head encapsulated with glass instead of epoxy. Glass encapsulated
NTC thermistor presents better long term stability, more compact size, shorter response time, and a wider temperature range.
This NTC thermistor has two leads covered with high temperature plastic tubing and gets sealed between thermistor head and two leads, which can prevent the thermistor from being corroded in the liquid. The covered leads can prevent them from shorting from each other. Therefore, this NTC thermistor is liquid resistant. Moreover, this NTC thermistor can work under up to 250°C temperature, more than that of other similar products. The nominal resistance at 25°C is 10K ± 1%. Thermistor diameter is very small, 1.0 ± 0.1mm， and the thermistor length is 1.4 ± 0.4mm. The length of the two leads is 66.5 ± 3mm. In still air, the time constant of this thermistor is 4s at 5~25°C. All the
NTC thermistors are lead free and RoHS compliant.
Physical photo of NTC thermistor
There are also NTC thermistors with ring lug that are used for easier fixing, such as
ATH10KL2A and
ATH100KL2C, etc. Check the link below for more information.
