Temperature Plate Assembly

Time : 2017-09-14 13:53Source :analogtechnologies Author : Analog Click :

ATTP1A is designed for evaluating TEC controllers easily. It’s easy to adjust the temperature range according to the customer requirement, so that the TEC controller can detect the pre-set temperature range. It provides a platform with wide temperature regulation range from -20°C to 110°C. The cold plate ATTP1A will be used together with TEC Controller TEC5V6A and TEC Controller Evaluation Board. The cold plate ATTP1A will connect with TEC controller by wire connector. It includes TEC module, thermistor and fan and heat sink on the right side of ATTP1A. Temperature range can be achieved through adjusting TEC temperature control parameters R1 (W11, W12, R1A), R2 (W21, W22, R2A), R3 (W31, W32, R3A) on the left side of the plate. There are three switches S1, S2 and S3 at the bottom right side of the plate. The switches will be turned off when adjusting the TEC temperature control parameters. When R1, R2 and R3 are all adjusted to the required resistance, turn on all switches.

This temperature plate assembly is very convenient to use. If you want to know the details, please visit our website:


TEC controller evaluation board can be found here:


Besides, we have many other TEC Controllers and TEC controller evaluation board, for instance, high voltage high current TEC controller TEC28V15A. It is powered by a DC voltage between 9V to 28V and output current can go up to 15A without using a heat sink.