What's New

Laser Driver

Time: Feb 17 2015    Click: 309

In optical fiber communication, optical module function is very important, and laser driver is used for light emission front, which can realize laser bias and modulation. The laser controller converts the voltage signal into current signal with high speed to modulatelaser and generate high-speed light signal. And then the light signal is coupled to the optical fiber transmission. In order to meet the different requirements of design, our company has various types of laser controller, such asultr...(more)

ATE1-127 TEC Modules

Time: Feb 17 2015    Click: 439

ATE1-127 TEC Modules have 127 pairs of Peltier elements. The maximum voltage is 15.4V, and there are 17 kinds of maximum current to choose from. The TEC module is used to accurately adjust the object temperature, when working with TEC controller, a highly stable and efficient temperature control system is constituted. ATE1-127 TEC is composed of two pieces of bare ceramic plate with very smooth surface. The ceramic plates can be installed to the flat surface of the metal, and there are a few lay...(more)

Thermal Conductivity Silicone Grease

Time: Feb 16 2015    Click: 427

Thermal conductivity silicone grease, thermal conductive siliconem andd thermal conductivity silicone pads distinction. Thermal conductive silicone is a kind of high thermal conductive insulating silicone material; solidification is a very difficult prcess. Grease status has electric insulation function, and thermal conductivity, low bleed, general used in the CPU in a computer. Thermally sonductive silicone rubber can be cured. Have some sohesiveness, its hard to Separate. Why are we smearing t...(more)

Thermal Conductive Silicone Piece

Time: Feb 16 2015    Click: 323

Thermal conductive silicone piece: its based on silica gel material; add some metal oxide as the auciliary materials. Its medium about heat conduction material by a special technology. Silicone rubber puts organic ilicon resin as the cohere materials. Fill the thermal conductive powder; it is polymer composite that is a target of thermal conductivity. There are some materials: Organic silicon resin (basic material) Insulating thermal conductive filler:Alox、Mgo、CBN、ALN、BeO、quartz and ot...(more)

LED controller

Time: Feb 15 2015    Click: 259

LED controller control LED lamp switch of each location in circuit by using the chip processing. According to the preset procedure, the controller controls the driving circuit to make the LED array regularly luminescence. Then it can display a text or graphics. LED controller has many advantages, which can prolong the lifetime of LED and save energy. The LED controller also has convenient wiring. Whats more, according to the actual needs of customers, it can realize the change effect of jump and...(more)

Introduction to plastic tubing

Time: Feb 13 2015    Click: 323

There are many kinds of plastic tubing, and we mainly introduce three types: PVC tubing, CPVC tubing and UPVC tubing. (1)PVC tubing According to the hardness and the properties of materials PVC, Polyvinylchloride, (SG1-SG7), and the density are about 1.4g/cm. What is under SG4 is generally called soft product. It needs to add a lot of plasticizers during the molding, and it is mainly used for making artificial leader, wire and cable insulation and sealing elements. Hard product above SG5 has app...(more)

Classification of Power Supply of LED Street lamp

Time: Feb 13 2015    Click: 356

There are many kinds of street lamp power supplies. According to the driving method, the street lamp power supplies can be divided into two categories. (1)Constant current mode Output current of the drive circuit is constant; while the output DC voltage is different in a certain rangeas the size of the load resistance varies-when the load resistance becomes small, the output voltage will be low; when it becomes big, the output voltage will be high. The constant current circuit allows the load to...(more)

LED Power Driver

Time: Feb 12 2015    Click: 377

LED power driver is a voltage converter, which can make a power supply convert into a specified voltage and current to drive the LED light. According to the rules of using electricity and the performance requirements of LED driver, we need to consider the following points when we select and design the LED power driver. (1)High reliability. LED power driver, especially the driving power of LED street lamp, needs to meet the high reliability because the maintenance is convenient and the maintenanc...(more)

  • Home
  • Previous
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • Next
  • Last Page
  • Total 92 Page 736 Records.