Here is more about the Peltier controller
ATEC24V10A-D. This Peltier controller provides a high stability low noise 2.5V reference voltage, which is used to set the output current limit and set-point temperature. In addition, it is also used as the voltage reference for external ADC and DAC.
High voltage Peltier controller ATEC24V10A-D offers a switch mode output stage. An external clock signal can synchronize the switching frequency of ATEC24V10A-D, which is aimed to eliminate any possible beating noise on the power supply rails. The switching signal of the switch mode output stage will trigger the synchronization port to output a clock signal, which can be used as the source clock signal for synchronizing other switch mode electronics module.
The six sided metal enclosure of this Peltier controller can prevent it from being interfered by other electronics. There are two mount types, through hole mount and surface mount. Through hole type has a "D" at the end of the part number, ATEC24V10A-D, while surface mount type has a "S" at the end of the part number, ATEC24V10A-S.
The photos of actual peltier controller ATEC24V10A-D
Please read the datasheet for more detail information or contact us directly.
