ATI provides a series of
Peltier controllers, among which most are low voltage peltier controllers. In order to meet the customers' requirements about high voltage, we have developed a high voltage Peltier controller,
ATEC24V10A-D.
There is a high output voltage, 24V, and a high output current, 10A. Therefore, this peltier controller is able to drive high power
Peltier module in order to get high temperature stability. This Peltier controller has high efficiency, more than 98%. It has high temperature stability, ±0.01°C. This high temperature stability can be achieved by using a compensation network in order to match the characteristics of the thermal load. This compensation network consists of external components, which can be set differently for different thermal load.
Programmable current limit is a feature of this controller, which allows setting the output current limit. In addition, there is another feature of this Peltier controller, temperature good indication. When the target temperature is equal to the set-point temperature, an indication voltage on the TMPG pin is set high. The set-point temperature range can be programmed externally by 3 resistors.
The photos of actual peltier controller
If you want to know more about our peltier controllers, please read the datasheet or contact us directly.
