An inductor is a passive electronic component, which is an important part in present electronic design. The inductor stores energy in the form of a magnetic field. SMT inductor is a very tiny component, which its not easy to store and keep. SMT Inductor kits , designed and produced by ATI, provides a solution for storing surface mount inductors. There are various values and quantities of inductors in the inductor kits, and all the inductors are from renowned inductor manufacturer, such as TDK, V...(more)
Based on thermoelectric cooler (TEC), Peltier controller (TEC controller) is designed by ATI (Analog Technologies, Inc.). Peltier controller released by ATI has compact size, high stability, high reliability, high accuracy, long service lifetime, etc. It is 100 % lead (Pb)-free and RoHS compliant. There are many kinds of Peltier controllers in our company, TECA1-XV-XV-D series, ATEC24V10A-D series, ATEC24V10A series and so on. The following is the Physical photo of Peltier controller. Figure 1....(more)
SMT Inductor kits are designed and produced by Analog Technologies, Inc. It has been sold in US and overseas market for over 20 years with nearly 100% good feedback. This inductor kit has been improved in some aspects such as compartment lid. The original inductor kit has square compartment lids and doesnt leak large-size components, such as 1206 or larger, but would leak small size parts; the improved one has round lids and doesnt leak components even down to 0402. There is one top cover that h...(more)
Thermoelectric cooler ( TEC) is solid thermoelectric effect. Comparing with traditional cooling method, TEC has obvious different features, simple structure, no moving parts, no vibration, no wear, high reliability, long service lifetime, etc. Whats more, TEC starts fast and it is flexible to control TEC. The following is the physical photo of TEC. Figure 1. The photo of TEC Based on TEC, Peltier controller is built to control temperature, as shown in Figure 2. Because of compact size, there is...(more)
Peltier controller is an electronic module which is designed for regulating the thermal load temperature. By using a Peltier module, the temperature of the thermal load can be increased or decreased, which depends on the current direction going through the two terminals of the TEC. Peltier controller can regulate the temperature of the thermal load with high efficiency and accuracy. Here is a popular Peltier controller in US and global market, TEC5V6A-D. This Peltier controller comes with a 90%...(more)
For a temperature regulating system, NTC thermistor is very important as the temperature sensor. Glass encapsulated thermistor has better performance than epoxy coated thermistor, such as zero short and long term drift, which is an important factor in order to achieve high system performance. Low cost epoxy coated NTC thermistor have large short and long term resistance drift, so when sensing the same temperature, the resistance changes with time, it will lead to a wrong sensed temperature, resu...(more)
Thermistor is a kind of sensitive elements. According to different temperature coefficients, thermistor can be divided into positive temperature coefficient thermistor (PTC thermistor) and negative temperature coefficient thermistor ( NTC thermistor ). The typical characteristic of thermistor is temperature sensitive. With temperature increasing, the PTC thermistor resistance will increase and the NTC thermistor resistance will decrease. PTC thermistor and NTC thermistor both belongs to semicond...(more)
Based on Peltier effect, thermoelectric cooler (TEC) is built, which can both heat and cool, depending on the direction of DC current. TEC is a heat transfer tool. It has many advantages such as no refrigerant, high precision temperature control, compact size and so on. TEC has been widely used for temperature control of laser system temperature, refrigeration, water heater, air conditioner and computer CPU, etc. The working state of TEC is based on the current direction and size. In order to re...(more)
