TEC modules are widely used in many applications for heating up or cooling down target objects. TEC controller is a electronic module that is used to control TEC module with high stability and high energy efficiency. This TEC controller TEC5V6A-D has a maximum output current of 6A and maximum output voltage of VPS-0.3V. The efficiency is high, more than 90%. The users of this TEC controller can use some interface ports to set parameters like the desired object temperature, the maximum output vol...(more)
Evaluation board of laser driver is designed and used to evaluate laser driver conveniently and safely. The laser is usually expensive and vulnerable, thus its necessary to use a dummy laser to emulate real laser. ATLS1A103DEV1.0 is such an evaluation board to evaluate popular laser driver series, ATLSXA103 series laser drivers, including ATLS100MA103D, ATLS200MA103D, ATLS250MA103D, ATLS500MA103D, and ATLS1A103D laser drivers of DIP package. This laser driver evaluation board comes with a dummy...(more)
High voltage power supply is designed and used to achieve DC DC conversion from low voltage to high voltage. AHV12V3KV1MAW is a typical high voltage power supply. As shown in the part number, AHV12V3KV1MAW, A stands for the company name, Analog Technologies, Inc; HV is for high voltage; 12V is the typical input voltage, and 3KV is the maximum output voltage, 3000V. 1MA means the maximum output current, and W refers to the connection type, wire. There are several wires in the high voltage power s...(more)
AHV12V2KV1MAW is a newly developed high voltage power supply, which is used to converse low voltage to high voltage. This high voltage power supply can be applied to many fields, such as electron beam welding, CRT monitor test, particle accelerator, nanotechnology application, etc. The input voltage of this high voltage power supply is from 11V to 13V, typically 12V, and the output voltage ranges from 0V to 2kV. The input current for full load is 350mA typically. The maximum output current is 1....(more)
ATLS250MA103 is a laser driver in 103 series, with a maximum current up to 250mA. This laser driver features low noise, 2.5AP-P at the frequency of 0.1Hz to 10Hz. This laser diode driver doesnt need heat sinks since it generates very small amount of heat, less than 1W. The absolute accuracy of this laser driver is high, 0.1%. It also comes with high stability, 100ppm/C. The laser controller has a over temperature protection circuit, which can prevent the laser driver from being overheat when the...(more)
ATH10KBL2A is a high performance NTC thermsitor series, with glass encapsulated thermistor head and a ring lug outside it. The ring lug is used to mount to other objects easily and the glass encapsulated thermistor head ensures high stability and liability. The ATH10KBL2A is one of the three models in this series. The other two part numbers are ATH10KBL2AT65 and ATH10KBL2AT65S. These two thermistor assemblies have plastic tubing covered in the two lead wires in order to prevent the leads from sh...(more)
ATH100KL2C is a NTC thermistor assembly with a ring lug outside the thermistor head, as shown in the photo below. This ring lug is used for mounting to a target object easily. The thermistor head inside the ring lug is ATH100K1R25, so the characteristics of ATH100KL2C are similar to ATH100K1R25. The nominal resistance of this thermistor assembly at 25 Celsius degree is 100k. Besides this type, we have another two types in this series, ATH100KL2CT70 and ATH100KL2CT70S, both of which have their tw...(more)
ATH100K1R25 is a high performance ntc thermistor series. It has three models, i.e., ATH100K1R25, ATH100K1R25T70, and ATH100K1R25T70S. They are all glass encapsulated NTC thermistors with high stability and long term liability. The latter two thermistors are covered with plastic tubing in their two lead wires for insulation purpose and the last one is the sealed version of the previous one, which can be used in moisture environment. The thermistor head has a very compact size, 1.25mm diameter. Th...(more)
