ATH100K1R25 series thermistors have three versions, ATH100K1R25, ATH100K1R25T70 and ATH100K1R25T70S. ATH100K1R25 has two bare leads; ATH100K1R25T70 has two leads covered with high temperature plastic tubing, non-sealed; and ATH100K1R25T70S comes with leads covered with plastic tubing, sealed. This series thermistor is glass encapsulated, and can be applied to sensing temperature for laser diodes and optical components, etc. The thermistor has a compact size: 1.25mm2.0mm. The length of the two le...(more)
AAS40A3.5V is a kind of laser power supply, which is designed for driving 0~40A laser diodes. It can set 0~40A output current by setting 0~2.5V analog voltage. There are short circuit and over temperature protection circuit inside. This laser power supply has high efficiency, more than 76%. It saves energy and has low temperature rise. The physical photo of AAS40A3.5V laser power supply is shown in Figure 1. Figure 1. The physical photo of AAS40A3.5V laser power supply AAS40A3.5V2 laser driver c...(more)
ATH100KL2A is a kind of glass encapsulated thermistors and it comes with an extra compact ring lug, as shown in Figure 1. When comparing with traditional epoxy encapsulated thermistor , this thermistor can provide higher long-term stability and a wider range of temperature. Whats more, it has compact size, short responding time and some other advantages. This thermistor can be utilized to measure the temperature of laser diode and optical elements with high accuracy and long-term stability. Figu...(more)
ATH10KR8B is a newly developed NTC thermistor of our company, Analog Technologies, Inc. This thermistor is the replaced version of our ATH10KR8, which has stopped production. ATH10KR8B series thermistors can be applied for temperature sensing for laser diodes, optical components, etc. This thermistor is glass encapsulated with high accuracy and high stability. The resistance accuracy is up to 1%. It comes with very short response time. Similar to ATH10KR8, ATH10KR8B series also has three version...(more)
TEC modules ( thermoelectric coolers ) are designed for cooling and heating, depending on the direction of direct current. When the current flows from the negative direction to the positive direction, TEC will start to cool, and conversely, it will start to heat. TEC modules have been widely used for controlling the temperature of laser system, refrigerator cooling system, air conditioner, computer CPU and so on. The physical photo of TEC module Our company has researched and developed TEC modul...(more)
Constant current laser driver refers to ATLSXA202 series laser drivers, which outputs constant laser current with high efficiency and low noise. The efficiency can reach over 90%. The output noise of the current is 0.05%. The laser driver provides a series of functions, laser constant current control, laser current monitoring, over current and thermal protection, witching frequency synchronization, laser diode status indication, soft start, and shut down. ATLS3A202D is one of the constant curren...(more)
150W switching power supply is a kind of LED power supply , which converts AC to DC. It can provide a 12V, 12.5A max 150W maximum DC output with constant voltage source. Its maximum current is 0.9A @ 220V and 1.8A @ 110V respectively. This power supply has many advantages, such as high efficiency (more than 85%), high reliability, high stability, long service lifetime and so on. The power supply released by us meets the UL, CUL, TUV/GS, CE, FCC, CCC, etc. Figure 1 is the physical photo of 150W s...(more)
ATRDB12 is a resistor decade box , which is utilized to set resistance value accurately. As ATRDB12 has wide adjustable range from 0.1Ω to 100 MΩ, small error 1%, compact size and durable metal enclosure, it has been widely used for regulating working network and circuit experiment. Figure 1 is the physical photo of the resistor decade box, ATRDB12. Figure 1. The photo of ATRDB12 ATRDB12 is an independent research and development product of our company (ATI). Because of the above characteris...(more)
