The ATH100KL2A is a capped ntc thermistor encapsulated with glass and packaged in a compact ring lug. This thermistor series consist of ATH100KL2A, ATH100KL2AT63 and ATH100KL2AT63S. The ATH100KL2A has two leads coated with copper, the ATH100KL2AT63S has the two leads covered with plastic tubing and sealed by epoxy for insulation and liquid resistant, while the ATH100KL2AT63 is the non-sealed version. ATH100KL2A series thermistors feature better long term stability, higher reliability and wider t...(more)
ATH100K1R25 series ntc thermistors are high precision glass encapsulated thermistors with long term stability. Comparing with conventional epoxy encapsulated thermistors, ATH100K1R25 has a wider temperature range, especially on the high end applications, better long term stability, smaller size, and a shorter response time. Besides the bare leads, we provide two insulation versions. One is with the two leads covered by plastic tubing, and the part number is ATH100K1R25T70, and the other one, the...(more)
With the development of science and technology, thermal electric coolers (TECs) have become more and more popular in cooling systems. TECs can both heat and cool at the same time, depending on the direction of the input current. And TECs have many advantages of no pollution, no noise, no wearing, a long life time, and high reliability, etc. In order to keepthe temperature stable when using TECs, our company (ATI) has designed and released a Peltier controller, which has many adjustable parameter...(more)
Continued from the last article As shown in Figure 1, TECA1-5V-2.5V-D is a typical Peltier controller of ATI ( Analog Technologies, Inc. ). This Peltier controller has an input voltage of 5V and the maximum output voltage of 2.5V. And the Peltier controller is packaged in a metal enclosure, which helps to block the interferences between the controller and other electronics. Figure 1. The photo of a Peltier controller There are many interface ports on the Peltier controller, which users can use t...(more)
ATH10K1R25 series ntc thermistors are glass encapsulated thermistors with high stability and high precision that are popularly applied in temperature sensing for laser diodes, optical components, industrial process control, etc. All of these applications require high temperature sensitivity, long term stability, and/or high sensing temperature. The main parameters are shown in the table below. Parameter Value Nominal Resistance@ 25C 10K 1% b Value @ 25C/50C 3950K 1% b Value @ 25C/85C 3990K 1% R@...(more)
TECs stand for thermal electric coolers , which consist of Peltier elements. TECs are utilized to heat and cool according to the current direction, and as they haveno noise, no wearing, long service lifetime and high reliability, they have become more and more popular in cooling system. In order to keep the temperature stable and control the temperature preciselywhen using TECs, our company ( ATI ) has designed and released a series of Peltier controller , and a typical one is shown in Figure 1....(more)
Peltier controllersare also called TEC controllers, which are designed and released by ATI to drive thermal electric coolers ( TECs ). And Peltier controllers are the independent research and development products of ATI with good quality, long service lifetime and compact sizes. Peltier controllers can be divided into many types: TECA1-XV-XV-D series, TEC5V6A-D, and ATEC24V10A-D, etc. Figure 1. The photo of the Peltier controller By using a Peltier controller, users can set, monitor and regulate...(more)
The ATEC24V10A-D is a kind of Peltier controllers with high voltage and current. It is utilized to drive high power thermal electric coolers ( TECs ) to keepthe temperature stable. As the Peltier controller has high efficiency, highreliability and a compact size, it has been widely used in temperature control system. Figure 1. The physical photo of the ATEC24V10A-D Peltier controller The ATEC24V10A-D Peltier controller has a wide input voltage range from 5V to 25V, and users can set the current...(more)
