NTC thermistor is short for negative temperature coefficient thermistor, the resistance of which decreases when the temperature rises. NTC thermistor has been widely applied in many fields, such as electronic thermometer, air conditioner, or automobile temperature measurement and monitor circuit. ATH100KR8 is a typical NTC thermistor manufactured by ATI, which provides various types of NTC thermistors. As shown in the part number, ATH100KR8, we can see that the nominal resistance at 25C is 100k,...(more)
Laser diode is widely used in many fields nowadays, so there is an urgent need for laser diode driver with high efficiency, high stability and low noise. ATI provides various types of laser diode drivers with different currents and noise values, and ATLS1A103 is one of the most popular laser drivers among them. ATLS1A103 laser diode driver comes with ultra low noise, about 6AP-P at the frequency of 0.1Hz to 10Hz. This laser driver doesnt need heat sinks to dissipate heat since the power consumpt...(more)
ATLS500MA103 is a laser diode driver with a maximum current up to 500mA. This laser driver comes with low noise, 5AP-P at 0.1Hz to 10Hz. The power supply voltage is 5V, and the output voltage range is from 1.5V to 4V. Since the heat generated by this laser driver is 1W, so there is no need to provide a heat sink for this laser driver. This laser diode driver has a metal enclosure with six sides, which blocks EMI from other electronics. Moreover, this laser driver has a compact size that can save...(more)
TEC modules are widely used in many applications for heating up or cooling down target objects. TEC controller is a electronic module that is used to control TEC module with high stability and high energy efficiency. This TEC controller TEC5V6A-D has a maximum output current of 6A and maximum output voltage of VPS-0.3V. The efficiency is high, more than 90%. The users of this TEC controller can use some interface ports to set parameters like the desired object temperature, the maximum output vol...(more)
Evaluation board of laser driver is designed and used to evaluate laser driver conveniently and safely. The laser is usually expensive and vulnerable, thus its necessary to use a dummy laser to emulate real laser. ATLS1A103DEV1.0 is such an evaluation board to evaluate popular laser driver series, ATLSXA103 series laser drivers, including ATLS100MA103D, ATLS200MA103D, ATLS250MA103D, ATLS500MA103D, and ATLS1A103D laser drivers of DIP package. This laser driver evaluation board comes with a dummy...(more)
High voltage power supply is designed and used to achieve DC DC conversion from low voltage to high voltage. AHV12V3KV1MAW is a typical high voltage power supply. As shown in the part number, AHV12V3KV1MAW, A stands for the company name, Analog Technologies, Inc; HV is for high voltage; 12V is the typical input voltage, and 3KV is the maximum output voltage, 3000V. 1MA means the maximum output current, and W refers to the connection type, wire. There are several wires in the high voltage power s...(more)
AHV12V2KV1MAW is a newly developed high voltage power supply, which is used to converse low voltage to high voltage. This high voltage power supply can be applied to many fields, such as electron beam welding, CRT monitor test, particle accelerator, nanotechnology application, etc. The input voltage of this high voltage power supply is from 11V to 13V, typically 12V, and the output voltage ranges from 0V to 2kV. The input current for full load is 350mA typically. The maximum output current is 1....(more)
ATLS250MA103 is a laser driver in 103 series, with a maximum current up to 250mA. This laser driver features low noise, 2.5AP-P at the frequency of 0.1Hz to 10Hz. This laser diode driver doesnt need heat sinks since it generates very small amount of heat, less than 1W. The absolute accuracy of this laser driver is high, 0.1%. It also comes with high stability, 100ppm/C. The laser controller has a over temperature protection circuit, which can prevent the laser driver from being overheat when the...(more)
