Product Catalog
- TEC/Peltier Controllers
- Laser Drivers
- TEC Modules
- Thermistors
- TEG
- Heat Sink
- Temperature Plate Assembly
- Thermal Conductive Material
- SMT/SMD Resistor Kits
- SMT/SMD Capacitor Kits
- SMT/SMD Inductor Kits
- Empty Enclosure
- Adjustable Decade Boxes
- LED Related Products
- Noise Measurement Amplifier
- High Voltage Power Supply
- Household Earthquake Alarm
- + More Products
- Videos
Contact Us
Analog Technologies, Inc.
2352 Walsh Ave.
Santa Clara, CA 95051
U. S. A
Tel.: 408-748-9100
Fax: 408-748-9111
New Website: www.analogti.com
Online Store: www.smtzone.com
High Voltage Laser Driver ATLSXA214
Time : 2015-07-24 13:44Source :analogtechnologies Author : Analog Click :
Laser driver with high output voltage is capable of driving one or more laser diodes simultaneously. The input voltage can be 5V to 16V, and the output voltage is from 0V to 15V. The laser driver generates ultra low output current noise : < 12µA@0.1Hz~10Hz, with high current stability <±600µA@4A &-20°C~80°C.
Though this laser driver comes with high efficiency >92%, it doesn't need heat sink to dissipate heat, a small amount of heat.
The laser driver will shut down by itself when the temperature exceeds the temperature limit 120°C. Under shutdown mode, all the parts will stop working, while the input current is reduced to < 3µA. A loop good indication output is used to tell users if this laser driver is working well.
A high modulation speed can be achieved due to the output stage. There is an over current protection circuit in this laser driver, which prevents the laser driver from being damaged by over current. There is also a soft start circuit which allows the laser driver to increase its output current slowly during start up process and shut down the current quickly.
The physical photo of high voltage laser driver ATLS10A214
If you want to know more, please contact us.
For detailed information of laser drivers, please visit us at: http://www.analogtechnologies.com/atlsxa214.html
Though this laser driver comes with high efficiency >92%, it doesn't need heat sink to dissipate heat, a small amount of heat.
The laser driver will shut down by itself when the temperature exceeds the temperature limit 120°C. Under shutdown mode, all the parts will stop working, while the input current is reduced to < 3µA. A loop good indication output is used to tell users if this laser driver is working well.
A high modulation speed can be achieved due to the output stage. There is an over current protection circuit in this laser driver, which prevents the laser driver from being damaged by over current. There is also a soft start circuit which allows the laser driver to increase its output current slowly during start up process and shut down the current quickly.
The physical photo of high voltage laser driver ATLS10A214
If you want to know more, please contact us.
For detailed information of laser drivers, please visit us at: http://www.analogtechnologies.com/atlsxa214.html
Next : Factors affecting the performance of thermoelectric cooler (Ⅰ) Last : Laser Driver Control System
Hot news
- How to use the NTC
- Application Status of Semiconductor Lasers
- Functions of Capacitor Kits
- Reliability of thermoelectric cooler
- The Principle of NTC Thermistor
- The Features of Laser Drivers
- Heat Sink in Thermoelectric Cooling System
- The Definition of Low Niose Amplifier
- Resistor/capacitor/inductor kits
- Analysis of LED Market Prospects