Product Catalog
- TEC/Peltier Controllers
- Laser Drivers
- TEC Modules
- Thermistors
- TEG
- Heat Sink
- Temperature Plate Assembly
- Thermal Conductive Material
- SMT/SMD Resistor Kits
- SMT/SMD Capacitor Kits
- SMT/SMD Inductor Kits
- Empty Enclosure
- Adjustable Decade Boxes
- LED Related Products
- Noise Measurement Amplifier
- High Voltage Power Supply
- Household Earthquake Alarm
- + More Products
- Videos
Contact Us
Analog Technologies, Inc.
2352 Walsh Ave.
Santa Clara, CA 95051
U. S. A
Tel.: 408-748-9100
Fax: 408-748-9111
New Website: www.analogti.com
Online Store: www.smtzone.com
Brief Introduction of Drive Mode of The Laser Driver
Time : 2015-03-26 16:48Source :analogtechnologies Author : Analog Click :
The incentive method of laser drivers is mostly injection current form. When the injection current is greater than the threshold current, radiation power will rapidly rise with the increase of the current. Therefore, by changing the injection current, the output optical power can be adjusted. In order to control semiconductor laser, the methods of automatic control are usually adopted, which includes constant current/power/voltage control.
In the constant power control mode, by using photoelectric detector, a small portion of laser power can be received and transformed into monitor current. Then after the monitor current is through the current to voltage convertor, a closed loop negative feedback control will be formed by comparing feedback network of constant power control with a set value. Due to the influences of temperature or other factors, the laser output power will change, and the negative feedback can control the optical power to keep stable.
In the constant current control mode, by current sampling and feedback, the current driving unit is provided active control and can make the current drift minimum. When cooperating with temperature control, the using effect will become better.
Now constant current control is usually adopted because semiconductor laser devices commonly use constant current source.
If you want to know more, please click here http://www.analogtechnologies.com/
In a special situation, constant voltage control is very simple and useful. When the drive voltage is constant as demanded, this mode will be selected.
In the constant current control mode, by current sampling and feedback, the current driving unit is provided active control and can make the current drift minimum. When cooperating with temperature control, the using effect will become better.
Now constant current control is usually adopted because semiconductor laser devices commonly use constant current source.
If you want to know more, please click here http://www.analogtechnologies.com/
Hot news
- How to use the NTC
- Application Status of Semiconductor Lasers
- Functions of Capacitor Kits
- Reliability of thermoelectric cooler
- The Principle of NTC Thermistor
- The Features of Laser Drivers
- Heat Sink in Thermoelectric Cooling System
- The Definition of Low Niose Amplifier
- Resistor/capacitor/inductor kits
- Analysis of LED Market Prospects