Product Catalog
- TEC/Peltier Controllers
- Laser Drivers
- TEC Modules
- Thermistors
- TEG
- Heat Sink
- Temperature Plate Assembly
- Thermal Conductive Material
- SMT/SMD Resistor Kits
- SMT/SMD Capacitor Kits
- SMT/SMD Inductor Kits
- Empty Enclosure
- Adjustable Decade Boxes
- LED Related Products
- Noise Measurement Amplifier
- High Voltage Power Supply
- Household Earthquake Alarm
- + More Products
- Videos
Contact Us
Analog Technologies, Inc.
2352 Walsh Ave.
Santa Clara, CA 95051
U. S. A
Tel.: 408-748-9100
Fax: 408-748-9111
New Website: www.analogti.com
Online Store: www.smtzone.com
Multi-stage of TEC
Time : 2015-02-02 17:17Source :未知 Author : admin Click :
The maximum temperature difference of a single-stage thermoelectric cooler with a standard can reach about 72℃. Some TEC can be stacked together by using mechanical method: the cold side surface of one TEC is installed on the hot side surface of another TEC, so the maximum temperature difference can reach 130℃. This stacking is called the cascade or multi-stage cooler layout. In general, multi-stage cooler has the shape of Pyramid, and a high level volume of TEC is smaller than the low level volume. However, regardless of the shape and the size, the low level TEC need to have a greater cooling capacity than the high level TEC do. Although currently, we have the ability to manufacture more than six or seven level multi-stage TEC, we generally use the two to fourlevel layouts.
The key factors limiting the performance of multi-stage TEC relate to performance of temperature change of thermoelectric semiconductor materials. In most devices, using the performance of bismuth telluride alloy, optimal value appeases at 70℃, and under low temperature, the performance will decrease. Generally speaking, with the increase of multi-stage cooler series, the added value of temperature difference will be smaller and smaller.
The establishment of a multi-stage cooler model: comparing to single stage TEC, the establishment of multi-stage TEC is more complex. In the multi-stage coolers, the temperature between two adjacent levels is very important, if you don’t know the temperature, the multi-stage cooler stage will not be established. And with the series increasing, the process of thermal analysis will become more and more complicated.
Next : Thermistor Last : High-Power Laser Diodes
Hot news
- How to use the NTC
- Application Status of Semiconductor Lasers
- Functions of Capacitor Kits
- Reliability of thermoelectric cooler
- The Principle of NTC Thermistor
- The Features of Laser Drivers
- Heat Sink in Thermoelectric Cooling System
- The Definition of Low Niose Amplifier
- Resistor/capacitor/inductor kits
- Analysis of LED Market Prospects