What's New

TEC Controller TEC5V6A

Time: 2017-09-25 14:20:23    Click: 118

The TEC Controller TEC5V6A is designed for driving TECs (Thermo-Electric Coolers). It can be highly stable to adjust the object temperature. It has a very small package with a 6 sided metal enclosure to prevent the controller and other electronics from interfering with each other. There are three models: TEC5V6A-D, TEC5V6A-S, TEC5V6A-DA. The TEC5V6A has a high stability and low noise 3.0V voltage reference which can be used for setting the desired object temperature by using a POT or a DAC. The...(more)

Temperature Plate Assembly

Time: 2017-09-14 13:53:12    Click: 175

ATTP1A is designed for evaluating TEC controllers easily. Its easy to adjust the temperature range according to the customer requirement, so that the TEC controller can detect the pre-set temperature range. It provides a platform with wide temperature regulation range from -20C to 110C. The cold plate ATTP1A will be used together with TEC Controller TEC5V6A and TEC Controller Evaluation Board. The cold plate ATTP1A will connect with TEC controller by wire connector. It includes TEC module, therm...(more)

High Voltage 4A Laser Diode Driver

Time: 2017-07-24 09:39:33    Click: 251

Laser diode driver 214 series includes ATLS8A214, ATLS6A214 and ATLS4A214. The maximum output current is 8A, 6A, and 4A respectively. ATLS4A214D has a compact size and a six sided metal enclosure that is used to prevent EMI from other electronics. This laser driver comes with a high efficiency, 90%, and no heat sinks are needed during operation since only a small amount of heat is generated by this heat sink. There are dual independent current set ports that are digitally controlled to switch be...(more)

Laser Driver Load Assembly ATLS212DLD1.0

Time: 2017-07-10 14:16:00    Click: 106

Laser driver load assembly is used for evaluating laser drivers instead of real laser diodes. Since real laser diodes. This laser driver load assembly, ATLS212DLD1.0, is designed for evaluating 212 series laser drivers in ATI. This series laser diode drivers feature high efficiency, high voltage, compact size, wide input and output voltage range, etc. This laser driver load assembly emulates real laser diodes for evaluating laser drivers since real laser diodes are vulnerable and expensive. This...(more)

High Voltage Power Supply AHV24V10KV1MAW

Time: 2017-07-06 11:19:37    Click: 211

AHV24V10KV1MAW is a newly developed high voltage power supply of ATI. This high voltage power supply has a negative output voltage, -10kV. It can be used in industry, medical treatment, agriculture fields for converting low DC voltage to high AC voltage. The input voltage of this high voltage power supply is from 23V to 25V, typically 24V. The maximum output current is 1mA. Moreover, this high voltage power supply comes with a compact size, 104.5mm60mm28mm. It also comes with an internal protect...(more)

Peltier controller TECA1-xV-xV-D

Time: 2017-06-30 10:59:20    Click: 108

High efficiency (up to 90%), high stability (0.004℃), high reliability and compact size, if you want to own such good TEC controllers, please click: http://www.analogtechnologies.com/TECA1-XV-XV-D.html http://www.analogtechnologies.com/document/TECA1-xV-xV-D.pdf Now Ill introduce this controller--TECA1-xV-xV-D briefly. The max output current is 2.5A, and it sets the set-point temperature to be between 15C to 35C (in default) when setting the TEMPSP pin voltage to be between 0V to 3V linearly....(more)

High Voltage DC/AC-DC Power Supply

Time: 2017-06-29 11:00:43    Click: 108

ATI develops and manufactures DC/AC-DC high voltage power supplies with positive and negative voltages. These high voltage power supplies convert low DC voltage or AC voltages to high DV voltages efficiently. They can be widely used in many applications, such as industrial control and measurement, medical care fields, etc. The input voltage can be 12VDC, 24VDC or 100 ~ 240VAC, the output voltage can be from 1kV to 18kV or -1kV to -10kV. Therefore, there are multiple options for input and output...(more)

High Voltage Power Supply AHV12VN6KV1MAW

Time: 2017-05-17 13:14:23    Click: 170

AHV12VN6KV1MAW is a new high voltage power supply developed in ATI. High voltage power supply is used for converting low DC voltage into high DC voltage. It can be used in many fields including ion beam deposition, ion beam assisted deposition, electron beam evaporation, DC reactive magnetron sputtering, microwave treatment high voltage capacitance test, etc. This high voltage power supply is different from other power supplies since it has a negative voltage output. The input voltage is 12V DC,...(more)

  • Home
  • Previous
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • Next
  • Last Page
  • Total 74 Page 585 Records.