What's New

Thermoelectric Cooler Peltier Cooler ATE1-49 Series

Time: 2016-06-07 11:14:40    Click: 214

ATE1-49 is a series of TEC modules with a maximum input voltage of 5.9V and 49 pairs of Peltier elements. They are designed to regulate the temperature for target objects and stabilize the temperature in a wide temperature range. TEC modules are applied in more and more fields since there are no moving parts in it and the size is also compact. There are several options for maximum current allowed to pass through the TEC module, from 1A to 6A, resulting in different power ratings. There are also...(more)

Laser Controller Laser Diode Driver ATLS250MA106

Time: 2016-06-06 17:15:00    Click: 142

ATLS250MA106 is one of laser diode driver designed and manufactured in Analog Technologies, Inc. This laser driver comes with low output noise and high output current absolute accuracy. It can be used for driving laser diodes, such as DPSSL, EDFA, SOA, fiber laser, etc. This laser diode driver has a maximum output current of 250mA with low noise. The noise value is 4.5VP-P at 0.1Hz to 10Hz. This output current can be linearly set by an input voltage, or modulated by an external signal of up to 1...(more)

High Performance ntc Thermsitor ATH10K1R25

Time: 2016-06-03 11:19:40    Click: 207

ATH10K1R25 is a glass encapsulated negative temperature coefficient thermistor, which comes with high performance, high precision, and high stability. This ntc thermistor has a compact size with the diameter of the thermistor head 1.25mm, as shown in the photo below. The nominal resistance @ 25C is 10k. There are two lead wires with the length of 70mm. For the type of the lead wires, we have three versions: one is bare leads; the second one has the leads covered with plastic tubing, which preven...(more)

High Performance NTC Thermsitor ATH100KR8

Time: 2016-06-02 11:49:01    Click: 115

NTC thermistor is short for negative temperature coefficient thermistor, the resistance of which decreases when the temperature rises. NTC thermistor has been widely applied in many fields, such as electronic thermometer, air conditioner, or automobile temperature measurement and monitor circuit. ATH100KR8 is a typical NTC thermistor manufactured by ATI, which provides various types of NTC thermistors. As shown in the part number, ATH100KR8, we can see that the nominal resistance at 25C is 100k,...(more)

Laser Controller Laser Diode Driver ATLS1A103

Time: 2016-05-31 10:39:57    Click: 229

Laser diode is widely used in many fields nowadays, so there is an urgent need for laser diode driver with high efficiency, high stability and low noise. ATI provides various types of laser diode drivers with different currents and noise values, and ATLS1A103 is one of the most popular laser drivers among them. ATLS1A103 laser diode driver comes with ultra low noise, about 6AP-P at the frequency of 0.1Hz to 10Hz. This laser driver doesnt need heat sinks to dissipate heat since the power consumpt...(more)

Laser Controller Laser Diode Driver ATLS500MA103

Time: 2016-05-30 15:46:51    Click: 201

ATLS500MA103 is a laser diode driver with a maximum current up to 500mA. This laser driver comes with low noise, 5AP-P at 0.1Hz to 10Hz. The power supply voltage is 5V, and the output voltage range is from 1.5V to 4V. Since the heat generated by this laser driver is 1W, so there is no need to provide a heat sink for this laser driver. This laser diode driver has a metal enclosure with six sides, which blocks EMI from other electronics. Moreover, this laser driver has a compact size that can save...(more)

Peltier TEC Controller TEC5V6A-D

Time: 2016-05-30 14:42:54    Click: 205

TEC modules are widely used in many applications for heating up or cooling down target objects. TEC controller is a electronic module that is used to control TEC module with high stability and high energy efficiency. This TEC controller TEC5V6A-D has a maximum output current of 6A and maximum output voltage of VPS-0.3V. The efficiency is high, more than 90%. The users of this TEC controller can use some interface ports to set parameters like the desired object temperature, the maximum output vol...(more)

Evaluation Board for ATLSXA103 Series Laser Driver

Time: 2016-05-27 12:52:57    Click: 218

Evaluation board of laser driver is designed and used to evaluate laser driver conveniently and safely. The laser is usually expensive and vulnerable, thus its necessary to use a dummy laser to emulate real laser. ATLS1A103DEV1.0 is such an evaluation board to evaluate popular laser driver series, ATLSXA103 series laser drivers, including ATLS100MA103D, ATLS200MA103D, ATLS250MA103D, ATLS500MA103D, and ATLS1A103D laser drivers of DIP package. This laser driver evaluation board comes with a dummy...(more)

  • Home
  • Previous
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • Next
  • Last Page
  • Total 74 Page 585 Records.