To offer more conveniences for our customers, we have specially designed evaluation board for ATLSxA217 high voltage laser drivers. If you are a customer of ATI, you must be quite familiar with our 217 series laser drivers. It owns the features of wide input and output voltage range, high output current capability, high efficiency, low output noise (but it has an output 4mVpp ripple voltage at 700kHz), wide modulation bandwidth, and small size. Besides, for its high current capability, 4A and 10A are available.
Now, please take a look at its physical photo of this evaluation board for ATLSxA217 high voltage laser drivers.
It is recommended to use this evaluation board together with our laser driver datasheet as ATLS4A217 and ATLS10A217. On the 4 edges of the board, it features solder pads for all the interface ports provided by the laser driver. The solder pads can be used by clips or soldered with wires for connecting to external circuits. The power supply input is connected on the upper edge of the board. The incoming wires can be soldered on the pads, or clipped by alligator clips, or use the terminal block and tight the wires by the screws. In the upper middle of the board, there is an LED. When the controller works properly, it will be lit up.
For more info., please find the datasheet of this evaluation board.
