Peltier controller TEC5V6A-D is a high efficiency and high stability module in regulating the object temperature that drives peltier modules. The TEC5V6A-D is packaged in a 6-sided metal enclosure, which blocks EMIs to prevent the controller and other electronics from interfering with each other. At the same time, there are other peltier controllers in TEC5V6A series, such as TEC5V6A-S, TEC5V6A-DAH etc.
The block diagram of TEC5V6A-D is shown below.
From the above block diagram, we can see: This peltier controller module provides interface ports for the user to set the desired object temperature, i.e. set-point temperature. It also provides compensation network, temperature measurement and monitoring, temperature control loop status indication. The compensation network compensates the high order thermal load and thus stabilizes the temperature control loop. In addition, it provides these functions: thermistor T-R curve linearization, TEC voltage monitoring, power up delay, and shut down.
This peltier controller TEC5V6A-D can be used with the evaluation board TECEV104. This evaluation board is mainly used to adjust the external compensation network of the peltier controller to meet the characteristics of the user's thermal load. The peltier controller module TEC5V6A-D can be evaluated conveniently by using this evaluation board TECEV104. User will be able to set the set-point temperature via W1 on the board. The output voltage and actual thermal load temperature can be monitored by measuring the voltage of TEMPSET and TEMPOUT.
If you are interested in this peltier controller TEC5V6A-D and want to know more, please check our website: http://www.analogtechnologies.com/TEC5V6A-D.html
Here are more peltier controllers and evaluation boards for you to choose:
