The TEC Controller TEC5V4A is designed for driving TECs. It can be highly stable to adjust the object temperature. There are three versions for this controller: TEC5V4A-D, TEC5V4A-DA, TEC5V4A-DAH. It has a very small package with a 6 sided metal enclosure to prevent the controller and other electronics from interfering with each other.
The TEC5V4A has high efficiency without using a heat sink. The efficiency is up to 90%. It is powered by a DC voltage 5V and the output current can go up to 4A. The maximum output voltage is VVPS − 0.2V. It has a high stability and low noise 3.0V voltage reference which can be used for setting the desired object temperature by using a POT or a DAC. The TEC5V4A has some functions, such as, temperature good indication, shut down control, power up delay, TEC voltage indication, temperature monitoring and so on.
TEC Controller TEC5V4A can collocate with the Evaluation Board TECEV104. The TEC Controller Evaluation Board is mainly used to adjust the external compensation network of the TEC Controller so as to match the characteristics of users’ thermal load. This Evaluation Board is also compatible with the TECA1-xV-xV-D and TECA1-xV-xV-DAH TEC Controllers.
If you want to know more about TEC5V4A, please visit our website:
http://www.analogtechnologies.com/TEC5V4A-D.html
TEC controller evaluation board can be found here:
http://www.analogtechnologies.com/Evaluation_Board_TECEV104.html
Besides, we have many other TEC Controllers and TEC controller evaluation board:
