Low Cost NTC Thermsitor Assembly ATH100KL2C

Time : 2016-06-29 09:29Source :analogtechnologies Author : Analog Click :

ATH100KL2C series is special thermistor assembly that is widely used in temperature sensing applications. The thermistor head inside the ring lug is a glass encapsulated ntc thermistor, the resistance of which changes with the temperature.

This thermistor assembly comes with a wide temperature range, i.e. from −40°C to 270°C. The ring lug is easy for mounting. The nominal resistance of this thermistor assembly is the same as ATH100K1R25, 100k and the accuracy is 1%. The diameter of the ring lug hole is 3.02mm. Besides, there are two lead wires in the thermistor assembly, and another two types of leads can be chosen: one is covered with plastic tubing and the other is also covered with plastic tubing and then has it sealed between the tubing and the ring lug. This is prepared for special environment such as moisture environment.

To build a stable and accurate temperature measurement system, use this NTC thermistor with TEC controller, TEC module and heat sink, etc.

For detailed information about this NTC thermistors, please visit:

http://www.analogtechnologies.com/ATH100KL2C.html

For more types of NTC thermistors, please click:

http://www.analogtechnologies.com/thermistor.html

If you want to know more about related products, please visit the links below:

http://www.analogtechnologies.com/thermistor.html

http://www.analogtechnologies.com/tec-module.html