ATH10KL2C ntc thermistor assembly is similar to ATH10KL2B. The difference between them lies in the size of the ring lug outside the thermistor head. The thermistor head inside the ring lug is the same, a glass encapsulated ntc thermistor. The inner diameter of the ring lug in ATH10KL2C is larger than that in ATH10KL2B, which means a larger hole.
The thermistor assembly is used for easy and fast mounting. Moreover, there are two more types in this series, ATH10KL2CT70 and ATH10KL2CT70S. The former one has the two lead wires covered with high temperature plastic tubing which prevents them from shorting each other. The latter one is the sealed version of the former one. It is sealed between the ring lug and the plastic tubing for insulation purpose. There is a physical photo of ATH10KL2C shown in below.
To build a stable and accurate temperature measurement system, use this NTC thermistor with TEC controller, TEC module and heat sink, etc.
For detailed information about this NTC thermistors, please visit:
http://www.analogtechnologies.com/ath10kl2c.html
For more types of NTC thermistors, please click:
http://www.analogtechnologies.com/thermistor.html
If you want to know more about related products, please visit the links below:
