ATH100KL2C is a NTC thermistor assembly with a ring lug outside the thermistor head, as shown in the photo below. This ring lug is used for mounting to a target object easily. The thermistor head inside the ring lug is ATH100K1R25, so the characteristics of ATH100KL2C are similar to ATH100K1R25. The nominal resistance of this thermistor assembly at 25 Celsius degree is 100k.
Besides this type, we have another two types in this series, ATH100KL2CT70 and ATH100KL2CT70S, both of which have their two lead wires covered with plastic tubing. The plastic tubing prevents the two leads short each other. The latter one is sealed between the plastic tubing and the thermistor head, so that moisture cannot enter into the head.
Moreover, we provide bare thermistors or thermistor assemblies with different parameters and performances, and you can visit:
http://www.analogtechnologies.com/thermistor.html
To build a stable and accurate temperature measurement system, use this NTC thermistor with TEC controller, TEC module and heat sink, etc.
For detailed information about this series of NTC thermistors, please visit:
http://www.analogtechnologies.com/ATH100KL2C.html
If you want to know more about related products, please visit the links below:
