Laser driver is also called laser controller, laser diode driver, which is designed and used for driving diode lasers. The laser drivers of Analog Technologies, Inc are featured compact size, high efficiency, low noise and RoHS compliant. ATLS100MA103 is one of 103 series laser drivers.
This laser driver, ATLS100MA103, outputs 1.5V to 4V when it is powered by a 5V input voltage. The maximum output current of this laser driver is 100mA with ultra low noise, 1.5μVP-P at a frequency of 0.1Hz to 10Hz. Since the power consumption of the laser driver is as low as <1W, any heat sinks are not necessary during normal operation. There are two packages available, DIP and SMT packages. DIP type laser driver is mostly for experiment and can be removed easily and SMT type laser driver can be soldered into the PCB, so it works more stably, but it's hard to remove. The photo below is the physical photo of this laser driver.
For more technical data of this laser driver, please visit our website at:
http://www.analogtechnologies.com/low_noise_constant_current_100ma_laser_driver.html
Our online store: shop.analogtechnologies.com/Laser-Controllers-Drivers_c2.htm
For more types of laser drivers, please visit us at:
http://www.analogtechnologies.com/ATLS_XXX_103.html
http://www.analogtechnologies.com/laserdriver.html
Various electronic products can be found here:
