Thermoelectric Cooler Peltier Cooler ATE1-07

Time : May 03 2016Source :analogtechnologies Author : Analog Click :

Peltier cooler ATE1-07 has 7 pairs of Peltier elements, with a maximum input voltage of 0.9V. The size of this series TEC modules is small, less than 10mm. There are two ceramic plates on the both side of the TEC module.

Take one TEC module as an example, ATE1-07-3AS, 1 refers to single stage TEC; 07 stands for 7 pairs of Peltier elements; 3A is the maximum current allowed to go through the TEC; S means sealed between the two ceramic plates of the TEC module, without this S in the part number, it is a non-sealed version. For moisture environment, sealed version is recommended, and for applications where high efficiency is needed, non-sealed version is then recommended. Besides 3A maximum current, there are three other currents for options, 0.8A, 1A, and 6A. The maximum temperature difference for 0.8A TEC module is 74°C, and for the TEC modules of other currents, it is 61.5°C.

If you want to know more about this TEC module, please visit:

http://www.analogtechnologies.com/tec-module.html

Our TEC modules can be controlled well with our TEC controller, please check:

http://www.analogtechnologies.com/tec-controller.html

There are more products provided by our company, please check:

http://www.analogtechnologies.com/