ATFC106D digital TEC controller assembly is the updated version of the old ATFC105D, which has stopped production now. As shown in the photo below, there is a LED display and a panel for operation. In this panel, you can set different parameters and monitor different status by the LED indication.
This controller assembly consists of a digital display, a TEC controller, a fan controller, and temperature controlled relay control output. It's recommended to use this TEC controller assembly with heat sinks and fans in an enclosed chamber that needs temperature control. This assembly has a high efficiency, over 98%. The output power is also high, 12V and 20A. There is a internal protection circuit which prevents the assembly from over current. There are two control loops in the controller, one is TEC, and the other is fan. The TEC control loop has a bi-directional output in order to achieve both heating and cooling effects, and the fan control loop switches the fan on and off.
This TEC controller assembly can work with our fan and heat sink to regulate an enclosed chamber temperature by driving a TEC array and a fan array.
For more technical data of this TEC controller, please visit our website at:
http://www.analogtechnologies.com/TEC_Controller_ATFC106D.html
For more types of Peltier controllers, please visit us at:
http://www.analogtechnologies.com/tec-controller.html
