Company's Patents

Company's Patent Company's Patent Company's Patent Company's Patent

Contact Us

Analog Technologies, Inc.
2352 Walsh Ave.
Santa Clara, CA 95051
U. S. A

Tel.: 408-748-9100
Fax: 408-748-9111
Email

New Website: www.analogti.com

Online Store: www.smtzone.com

Home > News >

Noise Measurement Amplifier

Time : 2015-08-27 15:43Source :analogtechnologies Author : Analog Click :
An oscilloscope can measure noise, but for ultra low noise, such as nV and µV level noises, it's hard to measure. There is a noise measurement amplifier ATNMA1.0, which is used to test and measure ultra low noise that can't be measured by an oscilloscope. 
This noise measurement amplifier can detect and amplify the noise signals by touching the selected point. There are seven magnifications, 10,000×, 30,000×, 100,000×, 300,000×, 1,000,000×, 3,000,000×, 10,000,000×. There are also three filter bandwidths available: : 0.1Hz ~ 10Hz, 0.1Hz ~ 1kHz, 0.1Hz ~ 100kHz.
There are several parts in this amplifier, a rechargeable battery, a coaxial cable and probes. The rechargeable battery can be used for over 20 hours. The battery capacity is 500mAh. The charging voltage is 4.2V. There is a function to monitor the battery capacity. When battery indicator switch is pressed, it's easy to observe if the battery needs to be charged. There are several LEDs on the amplifier, which shows the capacity. Meanwhile, when the battery is being charged, there are two charging display LEDs.
 
The physical photo of Noise Measurement Amplifier ATNMA1.0 
If you want to know more about this amplifier, please contact us. 
Our web site is 
http://www.analogtechnologies.com/noise_measurement_amplifier.html