Product Catalog
- TEC/Peltier Controllers
- Laser Drivers
- TEC Modules
- Thermistors
- TEG
- Heat Sink
- Temperature Plate Assembly
- Thermal Conductive Material
- SMT/SMD Resistor Kits
- SMT/SMD Capacitor Kits
- SMT/SMD Inductor Kits
- Empty Enclosure
- Adjustable Decade Boxes
- LED Related Products
- Noise Measurement Amplifier
- High Voltage Power Supply
- Household Earthquake Alarm
- + More Products
- Videos
Contact Us
Analog Technologies, Inc.
2352 Walsh Ave.
Santa Clara, CA 95051
U. S. A
Tel.: 408-748-9100
Fax: 408-748-9111
New Website: www.analogti.com
Online Store: www.smtzone.com
How to improve the processing performance of thermoelectric cooler(Ⅱ)
Time : 2015-07-31 09:37Source :analogtechnologies Author : Analog Click :
3. Guarantee fixture clamping force, flatness and parallelism
From the reason for generating weld resistance, in order to reduce weld resistance, the size deviation of TEC element should be as small as possible. At the same time, the fixture clamping force should be moderate, the flatness should be less than 0.03mm, and the parallelism should be less than 0.05mm. When soldering, spring pressure should be changed into reed pressure in order to ensure that pressures of two ends are same.
4. Optimizing weld process
During welding, it needs to ensure that temperature field is uniform. After meeting the welding requirements, solder melting time should be reduced as far as possible to decrease thermal shock. In order to reduce the temperature stress caused by shrinkage, cooling curve should be properly optimized.
5. Reducing the amount of solder
Based on meeting the requirements of weld strength and weld resistance, the amount of solder should be reduced as far as possible.
Our company specializes in design and produce TECs, TEC controllers and some other productsrelated TECs. Before our products go into market, they will go through strict design, testing and verification, so you can completely trust us. What’more,we can also customize your TECs based on thermal system.
If you want to know more about thermoelectric cooler, please contact us.
Our web site is http://www.analogtechnologies.com/tec-module.html
From the reason for generating weld resistance, in order to reduce weld resistance, the size deviation of TEC element should be as small as possible. At the same time, the fixture clamping force should be moderate, the flatness should be less than 0.03mm, and the parallelism should be less than 0.05mm. When soldering, spring pressure should be changed into reed pressure in order to ensure that pressures of two ends are same.
4. Optimizing weld process
During welding, it needs to ensure that temperature field is uniform. After meeting the welding requirements, solder melting time should be reduced as far as possible to decrease thermal shock. In order to reduce the temperature stress caused by shrinkage, cooling curve should be properly optimized.
5. Reducing the amount of solder
Based on meeting the requirements of weld strength and weld resistance, the amount of solder should be reduced as far as possible.
Our company specializes in design and produce TECs, TEC controllers and some other productsrelated TECs. Before our products go into market, they will go through strict design, testing and verification, so you can completely trust us. What’more,we can also customize your TECs based on thermal system.
If you want to know more about thermoelectric cooler, please contact us.
Our web site is http://www.analogtechnologies.com/tec-module.html
Next : Constant Current Laser Driver Last : How to improve the processing performance of thermoelectric cooler
Hot news
- How to use the NTC
- Application Status of Semiconductor Lasers
- Functions of Capacitor Kits
- Reliability of thermoelectric cooler
- The Principle of NTC Thermistor
- The Features of Laser Drivers
- Heat Sink in Thermoelectric Cooling System
- The Definition of Low Niose Amplifier
- Resistor/capacitor/inductor kits
- Analysis of LED Market Prospects